Kia Cerato 2021 Manual page 227

Features of your vehicle
Operating condition
1. Place the light switch in the AUTO
position.
2. Turn on the high beam by pushing
the Light switch away from you.
3. High Beam Assist (
will illuminate.
4. High Beam Assist will turn on
when vehicle speed is above 40
km/h (25 mph).
1)If the light switch is pushed
away when High Beam Assist is
operating, High Beam Assist will
turn off and the high beam will
be on continuously.
2)If the light switch is pulled
towards you when the high
beam is off, the high beam will
turn on without High Beam
Assist cancelled. When you let
go of the light switch, the lever
will move to the middle and the
high beam will turn off.
3)If the light switch is pulled
towards you when the high
beam is on by High Beam
Assist, the low beam will be on
and High Beam Assist will turn
off.
4)If the light switch is placed to
the headlamp position (
High Beam Assist will turn off
and the low beam will be on
continuously.
When High Beam Assist is operating,
the high beam switches to low beam
in the following conditions.
When the headlamp of an on-
coming vehicle is detected.
When the tail lamp of a vehicle in
) indicator
front is detected.
When the headlamp or tail lamp
of a motorcycle or a bicycle is
detected.
When the surrounding ambient
light is bright enough that high
beams are not required.
When streetlights or other lights
are detected.
When the light switch is not in the
AUTO position.
When High Beam Assist is off.
When vehicle speed is below 30
km/h (19 mph).
Warning light and message
),
When High Beam Assist is not work -
ing properly, the warning message
will come on for a few second. After
the message disappears, the mas -
Lighting
OBD041551R
4
4
131