Kia Cerato 2021 Manual page 45

Safety features of your vehicle
To adjust the height of the seat belt
anchor, lower or raise the height
adjuster into an appropriate posi -
tion.
To raise the height adjuster, pull it
up (1). To lower it, push it down (3)
whilst pressing the height adjuster
button (2).
Release the button to lock the
anchor into position. Try sliding the
height adjuster to make sure that it
has locked into position.
Improperly positioned seat belts can
cause serious injuries in an accident.
WARNING
Verify the shoulder belt anchor is
locked into position at the appro -
priate height. Never position the
shoulder belt across your neck or
face. Improperly positioned seat
belts can cause serious injuries in
an accident.
Failure to replace seat belts after
an accident could leave you with
damaged seat belts that will not
provide protection in the event of
another collision leading to per -
sonal injury or death. Replace
your seat belts after being in an
accident as soon as possible.
To fasten your seat belt:
ODEEV058025NR
To fasten your seat belt, pull it out
of the retractor and insert the
metal tab (1) into the buckle (2).
There will be an audible "click" when
the tab locks into the buckle.
The seat belt automatically adjusts
to the proper length only after the
lap belt portion is adjusted manually
so that it fits snugly around your
hips. If you lean forward in a slow,
easy motion, the belt will extend
and let you move around. If there is
a sudden stop or impact, however,
the belt will lock into position. It will
also lock if you try to lean forward
too quickly.
NOTICE
If you are not able to pull out the
seat belt from the retractor, firmly
pull the belt out and release it. Then
you will be able to pull the belt out
smoothly.
Seat belts
3
3 23