Inner Panel Fuse Replacement - Kia Cerato 2021 Manual

Maintenance
NOTICE
Window tinting precaution
Window tint (especially metallic
film) might cause communication
disorder or poor radio reception, and
malfunction of the automatic light -
ing system due to excessive change
of illumination inside the vehicle.
The solution used might also flow
into electric, electronic devices
causing disorder and failure.

Inner panel fuse replacement

1. Turn the ignition switch and all
other switches off.
2. Open the fuse panel cover.
OBD071017R
If the switch is located in the OFF ,
caution will be displayed in the clus -
ter.
3. Pull the suspected fuse straight
out. Use the removal tool pro -
vided in the main fuse box in the
engine compartment.
OBD071018
4. Check the removed fuse; replace it
if it is blown.
Spare fuses are provided in the
instrument panel fuse panel (or in
the engine compartment fuse
panel).
5. Push in a new fuse of the same
rating, and make sure it fits
tightly in the clips.
If it fits loosely, consult a profes -
sional workshop. Kia recommends to
consult an authorised Kia dealer/
service partner.
If you do not have a spare, use a
fuse of the same rating from a cir -
cuit you may not need for operating
the vehicle, such as the cigarette
lighter fuse.
If the headlights or taillights, stop -
lights, courtesy lamp, day time run -
ning lights (D.R.L) do not work and
the fuses are OK, check the fuse
panel in the engine compartment. If
a fuse is blown, it must be replaced.
Fuses
8
8 73