Cruise Control (Cc); Function Operation - Kia Cerato 2021 Manual

Driving your vehicle
Cruise Control (CC) (if equipped)
OBD051384L
(1) Cruise indicator
(2) Set speed
Cruise Control will allow you to drive
at speeds above 30 km/h (20 mph)
without depressing the accelerator
pedal.

Function operation

Setting speed
1. Accelerate to the desired speed,
which must be more than 30 km/h
(20 mph).
OBD051369
2. Press the Driving Assist button at
the desired speed. The set speed
and Cruise (
will illuminate on the cluster.
3. Release the accelerator pedal.
Vehicle speed will maintain the set
speed even when the accelerator
pedal is not depressed.
NOTICE
On a steep slope, the vehicle may
slightly slow down or speed up
whilst driving uphill or downhill.
Increasing speed
OBD051371
Push the + switch up and release
it immediately. The cruising speed
will increase by 1 km/h (1 mph)
each time the switch is operated
in this manner.
Push the + switch up and hold it
whilst monitoring the set speed
on the cluster. The cruising speed
will increase to the nearest multi -
ple of ten at first, and then
increase by 10 km/h (5 mph) each

Cruise Control (CC)

) indicator
6
6 129