Kia Cerato 2021 Manual page 346

Driving your vehicle
TCM (Transmission Control Module)
or PCM (Powertrain Control Module).
For smooth operation, depress the
brake pedal when shifting from N
(Neutral) to a forward or reverse
gear.
WARNING
Automatic transmission
Always check the surrounding
areas near your vehicle for peo -
ple, especially children, before
shifting a vehicle into D (Drive) or
R (Reverse).
Before leaving the driver's seat,
always make sure the shift lever
is in the P (Park) position; then set
the parking brake fully and shut
the engine off. Unexpected and
sudden vehicle movement can
occur if these precautions are not
followed in the order identified.
Do not use the engine brake
(shifting from a high gear to
lower gear) rapidly on slippery
roads.
The vehicle may slip causing an
accident.
CAUTION
To avoid damage to your trans -
mission, do not accelerate the
engine in R (Reverse) or any for -
ward gear position with the
brakes on.
6 24
When stopped on an incline, do
not hold the vehicle stationary
with engine power. Use the ser -
vice brake or the parking brake.
Do not shift from N (Neutral) or P
(Park) into D (Drive), or R
(Reverse) when the engine is
above idle speed.
Transmission ranges
The indicator in the instrument
cluster displays the shift lever posi -
tion when the ignition switch or
ENGINE START/STOP is in the ON
position.
P (Park)
Always come to a complete stop
before shifting into P (Park). This
position locks the transmission and
prevents the front wheels from
rotating.
WARNING
Shifting into P (Park) whilst the
vehicle is in motion will cause the
drive wheels to lock which will
cause you to lose control of the
vehicle.
Do not use the P (Park) position in
place of the parking brake. Always
make sure the shift lever is
latched in the P (Park) position
and set the parking brake fully.
Automatic transmission