Tyre Pressure Monitoring System (Tpms); System Overview; Tpms Setting - Kia Cerato 2021 Manual

What to do in an emergency
Tyre Pressure Monitoring Sys -
tem (TPMS) (if equipped)
Low tyre pressure telltale
OBD061005R
TPMS SET button
OBD061022R

System Overview

The tyre pressure monitoring sys -
tem (TPMS) senses change in radius
of the tyre. If the tyre pressure
decreases below the recommended
pressure, the system warning light
will be illuminated.
For the system to function properly,
it is the driver s responsibility to set
the system by following accurate
7 10

Tyre Pressure Monitoring System (TPMS)

procedure and set current tyre
pressure.
The warning light will illuminate on
the cluster when one or more of
your tyres is under-inflated after
the TPMS is set. The warning light
will also illuminate to warn the
driver of system malfunction.
Please refer to the above image (1)
for further information.

TPMS Setting

The driver can set the TPMS by fol -
lowing procedures below:
1. Inflate all tyres to the recom -
mended pressure.
2. Start the engine, make sure the
vehicle is not moving, and press
the TPMS switch (2) right side on
the driver s seat for over 3 sec -
onds.
3. Check if the (
tor blinks for 4 seconds.
4. Check if following message
appears on the cluster (if
equipped).
) warning indica -