Features of your vehicle
Detecting sensor
Rear view camera
OMQ4040489L
Refer to the picture above for the
detailed location of the detecting
sensor.
Function settings
Setting
OMQ4AH050163
You can change Rear View Moni-
tor settings by pressing the setup
icon (
) on the screen while the
function is operating.
4
124
Parking/View button
OMQ4A040041
Press the Parking/View button (1)
to turn Rear View Monitor on or off.
Function operation
Rear view with parking guidance
The function will operate when the
following conditions are satisfied:
ENGINE START/STOP button in
the ON position
The gear is changed to R
(Reverse) and the back up light
turns on
Maintaining rear view
When parking, the rear view will
maintain showing on the screen if
the following conditions are satis-
fied:
- The gear is changed from R
(Reverse) to N (Neutral) or D
(Drive)
- Vehicle speed is below 10 km/h
(6 mph)
Rear View Monitor (RVM)