Detecting Sensor - Kia Cerato 2021 Manual

Driving your vehicle

Detecting sensor

OBD051015R
OBD051014
[1]: Front view camera, [2]: Front radar
Refer to the picture above for the
detailed location of the detecting
sensors.
CAUTION
Take the following precautions to
maintain optimal performance of
the detecting sensor:
Never disassemble the detecting
sensor or sensor assembly, or
apply any impact on it.
6 84
Forward Collision-Avoidance Assist (FCA) (Sensor
If the detecting sensor have been
replaced or repaired have the
vehicle inspected by a profes -
sional workshop. Kia recom -
mends to visit an authorised Kia
dealer/service partner.
Never install any accessories or
stickers on the front windscreen,
or tint the front windscreen.
Pay extreme caution to keep the
front view camera dry.
Never place any reflective objects
(i.e. white paper, mirror) over the
dashboard. Any light reflection
may prevent the function from
functioning properly.
Do not apply license plate frame
or objects, such as a bumper
sticker, film or a bumper guard,
near the front radar cover.
Always keep the front radar and
cover clean and free of dirt and
debris. Use only a soft cloth to
wash the vehicle. Do not spray
pressurized water directly on the
sensor or sensor cover.
If unnecessary force has been
applied to the radar or around the
radar, Forward Collision-Avoid -
ance Assist may not properly
operate even though a warning
message does not appear on the
cluster. In this case, have the
vehicle inspected by a profes -
sional workshop. Kia recom -
mends to visit an authorised Kia
dealer/service partner.
fusion)