Kia Cerato 2021 Manual page 453

Driving your vehicle
If you push the + switch up or -
switch down, vehicle speed will be
set to the current speed on the
cluster.
If you press the
speed will resume to the preset
speed.
Vehicle speed must be above 30 km/h
(20 mph) for the function to resume.
Turning off the function
OBD051369
Press the Driving Assist button to
turn Cruise Control off. The Cruise
indicator will go off.
Always press the Driving Assist but -
ton to turn Cruise Control off when
not in use.
NOTICE
Take the following precautions
when using Cruise Control:
Always set the vehicle speed
under the speed limit in your
country.
button, vehicle
Keep Cruise Control off when the
function is not in use, to avoid
inadvertently setting a speed.
Check that the Cruise (
indicator is off.
Cruise Control does not substitute
for proper and safe driving. It is
the responsibility of the driver to
always drive safely and should
always be aware of unexpected
and sudden situations from
occurring.
Always drive cautiously to prevent
unexpected and sudden situations
from occurring. Pay attention to
the road conditions at all times.
Do not use Cruise Control when it
may be unsafe to keep the vehicle
at a constant speed:
- When driving in heavy traffic, or
when traffic conditions make it
difficult to drive at a constant
speed
- When driving on rainy, icy, or
snow-covered roads
- When driving on hilly or windy
roads
- When driving in windy areas
- When driving with limited view
(possibly due to bad weather,
such as fog, snow, rain and
sandstorm)
Do not use Cruise Control when
towing a trailer.
Cruise Control (CC)
)
6
6 131