Advertisement
CHAPTER 3 MECHANICAL SYSTEM
3) Remove the processing tray unit. (Figures
3-301 through -306)
4) Loosen the mounting screw [4] on the
adjusting plate [3] of the front jogging
plate found behind the processing tray
unit.
5) With reference to the rear jogging plate
adjusted in step 2), adjust the front
jogging plate (by making the gap between
the A4/LTR paper and the front end of the
front jogging plate to from 0 to 0.5 mm);
then, tighten the mounting screw loosened
in step 4).
3-14
COPYRIGHT © 1999 CANON INC.
[4]
[3]
Figure 3-316
Match the
width.
Front jogging
plate
Figure 3-317
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Paper
Finisher body
Advertisement
Chapters
