Canon FINISJER-E1 Service Manual page 111

Caution 1:
Before mounting the stack tray lifter unit,
make sure that the stack tray guide lever
(front, rear) is hooked on the tension spring.
Caution 2:
When mounting the paper height sensor,
make sure that the linkage of the sensor
flags 1 and 2 is engaged.
COPYRIGHT © 1999 CANON INC. CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
Tension spring
Stack tray guide lever (front)
(front)
Tension spring
Stack tray guide lever (front)
(rear)
Figure 3-609a
Sensor flag 1
Figure 3-609b
Sensor flag 2
3-29