Advertisement
CHAPTER 2 BASIC OPERATION
C.
Driving the Stack Delivery Belt
1.
Outline of Operations
The stack delivery belts are driven when the stack processing motor (M2) rotate clockwise, and
two belts are designed to move in sync.
Each stack delivery belt is equipped with two stack delivery levers on opposite sides. A single
stack is delivered for each half cycle of the belt movement.
When the copier is turned on, the stack processing motor (M2) is driven to set the stack
delivery lever to its home position.
2-20
Stack
Intermediary processing tray auxiliary plate
Figure 2-409
COPYRIGHT © 1999 CANON INC.
Stack delivery lever
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Stack delivery belt
M2
One-way clutch
Advertisement
Chapters
