Canon FINISJER-E1 Service Manual page 79

C. Stapler Jam
A staple jam is detected as follows:
1. Stapler Staple Jam (06H)
A stapler staple jam is identified as follows: stapling starts; the stapler leaves the stapling home
position sensor (S17); it moves back without reaching the stapling home position sensor but returns
to the stapling home position sensor within 0.5 sec.
Stapling ON signal
Stapler motor
Stapling home
position sensor (S17)
COPYRIGHT © 1999 CANON INC.
0.5sec
Normal
Figure 2-706
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
Jam detection
0.5sec 0.5sec
Error Jam
2-57