Canon FINISJER-E1 Service Manual page 59

b. Offset Jogging
The machine operate as follows in offset jogging:
In non-sort mode, sheets are offset only against the front.
1. The copier's Copy Start key is pressed.
The copier communicates such data as on sort mode selection and paper size.
2. The front/rear jogging plate is moved from the home position to a specific point*.
*Width of paper placed in the middle of the stack tray + 10 mm in both sides.
3. The paper is deposited on the intermediary processing tray.
COPYRIGHT © 1999 CANON INC.
Figure 2-418a
Figure 2-418b
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
Rear jogging
home position
10mm
10mm
Front jogging
home position
2-37