Advertisement
This Service Manual contains basic data and figures for the Finisher-E1 needed to
service the machine in the field.
Chapter 1 General Description introduces the finisher's features, specifications, and
names of parts, and shows how to operate the finisher.
Chapter 2 Basic Operation discusses the principles of operation used for the finisher's
mechanical and electrical systems. It also explains the timing at which these
systems are operated.
Chapter 3 Mechanical System discusses how the finisher is constructed mechanically,
and shows how it may be disassembled/assembled and adjusted.
Chapter 4 Maintenance and Inspection provides tables of periodically replaced parts and
consumables and durables, together with a scheduled servicing chart.
Chapter 5 Troubleshooting provides tables of maintenance/inspection, standards/
adjustments, and problem identification (image fault/malfunction).
Appendix contains diagrams showing electrical parts arrangement, tables of
signals, tables of special tools, tables of solvents/oils, and a general timing
chart.
For installation, see the Installation Procedure that comes with the finisher.
The descriptions in this Service Manual are subject to change without notice for
product improvement or other purposes, and major changes will be communicated in the
form of Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this
Service Manual and all relevant Service Information bulletins and be able to identify and
isolate faults in the machine.
COPYRIGHT © 1999 CANON INC.
INTRODUCTION
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
i
Advertisement
Chapters
