Advertisement
CHAPTER 2 BASIC OPERATION
3.
Sequence of Operations
1st sheet delivery signal
Inlet sensor (S2)
Delivery motor (M1)
Stack processing
motor (M2)
Returning roller home
position sensor (S3)
Stack delivery lever home
position sensor (S8)
Intermediary processing
tray paper sensor (S5)
Front jogging plate
motor (M3)
Front jogging plate home
position sensor (S6)
Rear jogging plate
motor (M4)
Rear jogging plate home
position sensor (S7)
Stack tray lifter
motor (M5)
Stack tray paper
height sensor (S10)
Stack tray paper
sensor (S11)
: CW rotation
Stack processing motor: CW
Front jogging plate motor: CW
Rear jogging plate motor: CW
Stack tray lifter motor: CW
*1: Varies depending on the length of paper.
*2: 0.2 sec.
*3: 0.3 sec.
*4: Varies depending on the length of paper.
*5: 0.5 sec.
*6: Stops temporarily.
*7: Drives until the stack tray paper height sensor turns off.
*8: After the stack tray has moved up and stopped, driven until the stack delivery lever reaches its
home position.
2-24
*1
*2
*3
stack delivery/CCW
move to front/CW
move to rear/CCW
up/CCW - down
Figure 2-411a
COPYRIGHT © 1999 CANON INC.
2nd sheet delivery signal
*1
*2
: CCW rotation
returning operation
move to rear
move to front
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
*3
*5
*6
*4
*7
*8
Advertisement
Chapters
