Canon FINISJER-E1 Service Manual page 116

CHAPTER 3 MECHANICAL SYSTEM
3) Tighten the mounting screw [2] of the belt
pulley plate to fix the belt pully plate [1].
Caution:
Mount the stack tray guide lever fixing plate
(front, rear) when the bottom end of the
stack tray guide lever matches the marking
on the frame so that the phase of the stack
tray guide lever will be correct at both front
and rear.
3-34
COPYRIGHT © 1999 CANON INC.
Figure 3-618a
Guide lever
Marking
Figure 3-618b
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Guide
lever
Marking