Canon FINISJER-E1 Service Manual page 108

CHAPTER 3 MECHANICAL SYSTEM
9) Remove the mounting screw [8] from the
front side plate, and detach the lower limit
sensor support plate [9].
10) Remove the two mounting screws [10],
and detach the grip unit [11].
3-26
COPYRIGHT © 1999 CANON INC.
[9] [8]
Figure 3-603
[10]
Figure 3-604
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[11] [10]