Canon FINISJER-E1 Service Manual page 57

4. The front jogging plate is driven, and is put into order.
5. The front jogging plate is returned to its position in operation 2.
6. For each delivery of paper, operations 3 through 5 are repeated.
7. When a single set has been put into order, stapling is started.
8. The stack processing belt is driven to move the stack to the stack tray.
9. The stack tray is moved up to a specific height.
10. Thereafter, operations 3 through 8 are repeated.
COPYRIGHT © 1999 CANON INC.
Figure 2-417c
Figure 2-417d
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
2-35