Advertisement
CHAPTER 1 GENERAL DESCRIPTION
4) Set the new staple case.
Reference:
No more than one staple case may be set. Be sure to use a staple cartridge specially designed for
the machine.
5) Remove the seal used to hold the staples together by pulling it straight up.
6) Fit the staple cartridge into the stapler unit.
7) Connect the finisher to the copier.
1-8
Figure 1-307
Figure 1-308
Figure 1-309
Figure 1-310
COPYRIGHT © 1999 CANON INC.
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Advertisement
Chapters
