Advertisement
CHAPTER 3 MECHANICAL SYSTEM
B.
Removing the Jogging
Plate Motor
1) Remove the processing tray unit. (Figures
3-301 through -306)
2) Remove the two mounting screws [1], and
disconnect the connector [2]; then, detach
the jogging plate motor. (You can remove
both jogging plate motors in the same
way.)
3-10
COPYRIGHT © 1999 CANON INC.
[1]
[2]
[1]
Figure 3-307
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
[1]
Advertisement
Chapters
