Canon FINISJER-E1 Service Manual page 101

C. Mounting the Returning
Roller Rubber
1) Fit the returning roller rubber [2] into the
surface groove of the returning roller [1]
starting at the bottom and working
upward.
At this time, try rotating the returning
roller gradually in the paper feeding
direction to facilitate the work.
COPYRIGHT © 1999 CANON INC. CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
1)
[2]
2)
3)
Figure 3-406
[1]
3-19