Canon FINISJER-E1 Service Manual page 69

b. Moving Up and Down the Stack Tray
After a stack of sheets has been delivered, the stack tray moves down until the stack tray paper
height sensor (S10) turns off and then stops; thereafter, it moves up to a point 12. 5 mm after the
paper height sensor (S10) has detected the top face of the stack tray.
Stack tray
COPYRIGHT © 1999 CANON INC.
Figure 2-602
Figure 2-603
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
Moving down
the stack tray
Moving up
the stack tray
2-47