Wiring - Honeywell SC1000 Owner's Manual

14.2 Wiring

page 130 008-0608-00
Connect your readout instrument to a DAC Output channel by wiring it to the 12-pin
connector of that channel. The Customer Information Sheet that shipped with the
instrument describes which cards are installed in each channel. The pin-out for this
connector is shown on the following table.
Table 3-9: DAC Output Channel Pin Connections
Pin Label
1 (top) N/C
2 N/C
3 N/C
4 N/C
5 N/C
6 N/C
7 +OUT
8 -OUT
9 N/C
10 N/C
11 N/C
12 N/C
(bottom)
The Analog Output and Analog Return pins are electrically isolated from all other pins
on the instrument.
Function Reference Pin
No connection
No connection
No connection
No connection
No connection
No connection
Analog Output
Analog Return
No connection
No connection
No connection
No connection
8
-