Chassis Models; Introduction - Honeywell SC1000 Owner's Manual

Chapter 4

Chassis Models

4.1 Introduction

The SC Series of Signal Conditioners/Indicators are available in several different
chassis models. In general, each chassis model operates in an identical fashion
and can be ordered with any type of Input channels, Output channels, or Virtual
channels.
Input channels and Output channels are printed circuit boards that occupy a phys-
ical slot inside the instrument's chassis. 12-pin connectors are located on the rear
panel to connect to each Input or Output Channel. Each channel in the instrument
is identified by a number (channel 01, channel 02, etc.).
A Virtual channel exists in software only; it does not occupy a physical slot inside
the instrument's chassis. There is no rear-panel connector for a Virtual channel.
However, a Virtual channel does require a channel number.
SC Series Instruction Manual page 25