Internal Arrangement; Cleaning; Vehicle Power Option; Fuse Replacement - Honeywell SC1000 Owner's Manual

4.4.5 Internal Arrangement

4.4.6 Cleaning

4.4.7 Vehicle Power Option

4.4.8 Fuse Replacement

page 32 008-0608-00
Step 2: Pull the front panel assembly out of the case.
Step 3: Proceed with Model SC2000 "Case Removal" on page 28.
See the Model SC2000 "Internal Arrangement" on page 29.
Turn off the instrument and unplug all connectors. Use a soft cloth or tissue and a
mild cleaner. Do not use liquid or aerosol cleaners. Do not allow any cleaner
inside the instrument.
The Model SC2001 is available with a vehicle power option for operation with bat-
teries and linear DC power supplies. See "Specifications" on page 26 voltage and
power requirements..
NOTICE
Due to the momentary startup inrush current of the instrument's power supply,
the use of switching power supplies with the SC are not recommended.
The power-line fuses of AC-powered instruments are located within the instru-
ment's power entry module on the rear panel. Use two 2A, 250V fast-blow fuses
(p/n 029-3026-00).