Specifications - Honeywell SC1000 Owner's Manual

12.5 Specifications

page 108 008-0608-00
TRANSDUCER INPUT
Transducer types
Excitation Voltage
Excitation Overcurrent Protection
Transducer full-scale output
Calibration Type
A/D Converter
Low-pass filter
Resolution and Frequency Response
INSTRUMENT-ONLY ACCURACY
(Frequency Response setting<=16Hz; Linearity, repeat-
ability & hysteresis)
Known -Load Calibration
AUXILLIARY INPUTS
Response Time
Field-Selectable Functions
ANALOG OUTPUT
Output voltage range
Output current range (optional current
output channels)
Frequency Response
(1)
Total excitation current of all channels must not exceed 120mA for Models SC1000,
SC2000 or SC2001 and 310 mA for Model SC3004.
amplified with voltage or current output,
±15 VDC @ 40 mA max.
(1)
+28 VDC @ 75 mA max.
+12 VDC @ 40 mA max.
±1, ±5, ±10 VDC
4-20 mA (field selectable)
2-, 3- or 5- point known load
24-bit Sigma-Delta
digital, 24-tap FIR
see "FREQ. RESPONSE Menu Item" on
Quantity
Type momentary contact closure
peak/valley clear, peak/valley hold,
5, ±5, 10 or ±10 VDC (field selectable)
Source any channel's track, peak or valley value
Isolation
Resolution
same as input when driven by the same
channel's tracking data
(field selectable)
(field selectable)
yes
shunt, or
page 109
±0.01% F.S.
2
< 5ms
tare on, tare off,
track hold
4-20 mA
500V
13 bits