Split Display Virtual Channel; Features; Wiring; Setup Procedure - Honeywell SC1000 Owner's Manual

Sensotec sensors signal conditioning, self-calibrating digital indicators

Table of Contents

15.1 Features

15.2 Wiring

15.3 Setup Procedure

The Split Display Virtual Channel allows the display of two track, peak or valley

values from any two channels at the same time. One value is displayed on the left

side of the display, and another value is displayed on the right side.

The display setup used to format each value is inherited from the source channel

of the value.

Split Displays are most useful on chassis with a 16-character display such as the

Models SC1000, SC2000 and SC2001. The quad-line, 20-character display of

the Model SC3004, however, already allows an Input Channel to show its own

Track & Peak, Track & Valley or Peak & Valley values on the display at the same

time. Thus, a Split Display Virtual Channel is not generally used on an Model

SC3004.

A Virtual Channel exists in software only; it does not occupy a physical slot inside

of the instrument's chassis. However, a Virtual Channel does require a channel

number.

There is no rear-panel connector for a Virtual Channel.

If you are not familiar with operating the instrument in the SETUP menu mode,

see "SETUP Menu mode" on page 23. A listing of all menu item is given in "Setup

Menu Reference" on page 157.

Step 1: Enter the value to be displayed on the left side with

SOURCE

Step 2: Enter the value to be displayed on the right side with

RIGHT SOURCE