Setup Menu Mode; Available Menus; Entering And Exiting The Setup Menu Mode; Moving Through Setup Menus And Menu Items - Honeywell SC1000 Owner's Manual

3.5 SETUP Menu mode

3.5.1 Available Menus

3.5.2 Entering and
Exiting the SETUP Menu
mode
3.5.3 Moving Through
SETUP Menus and Menu
Items
3.5.4 Exiting the SETUP
Menu mode
The SETUP Menu mode is used to display or change the settings that control the
operation of the instrument.
Each major function of the instrument has its own SETUP Menu. See "Setup Menu
Reference" on page 157.
To enter the SETUP Menu mode, press and hold the [UP] and [DOWN] buttons at the
same time until you see "
SETUP
see the first SETUP Menu item.
The following table shows how to move though menus and menu items, and how to
display or change the setting of a particular item.
Button
[UP] or [DOWN] Scroll through available menus, sub-menus or menu items.
[ENTER]
[EXIT] If changing a setting: abandons changes to a menu item
To change the setting of a menu item:
Press [ENTER] to display the current setting, which is preceded by the '
Press [UP] or [DOWN] until you see the setting you want. To abandon changes, press
[EXIT]. To accept the new setting and move to the next item, press [ENTER].
To leave SETUP mode and return to the RUN mode, press [EXIT] at any time.
" on the display. When you release the buttons, you will
Table 3-1: Navigating the Menus
Action
Select a menu, sub-menu or menu item
otherwise: leaves the SETUP mode.
SC Series Instruction Manual
' character.
*
page 23