Setup Procedure - Honeywell SC1000 Owner's Manual

16.3 Setup Procedure

If you are not familiar with operating the instrument in the SETUP menu mode,
see "SETUP Menu mode" on page 23. A listing of all menu item is given in "Setup
Menu Reference" on page 157.
Step 1: Examine the Supplemental Instructions.
Supplemental Instructions contain important information about what each
Mathematics Channel does and what Function Inputs and/or Limit Output
pins of the System connector are used.
Step 2: Wire to the pins on the System connector.
See "System Connector" on page 35. It is important to read the Supple-
mental Instructions to determine the wiring for your application.
Step 3: Verify operation.
SC Series Instruction Manual page 145