4.3 Models SC1000 and SC2000
4.3.1 Differences
4.3.2 External Arrangement
4.3.3 Rear Panel
4.3.4 Panel Mounting
Model SC1000 instruments do not include peak/valley capture or limits features.
All other SC instruments include peak/valley capture and 4 limit ("alarm") outputs.
The external arrangement of the AC powered SC1000 and SC2000 is given
below.
0123456789ABCDEF
0123456789ABCDEF
Figure 4-1: External Arrangement of AC powered SC1000 and SC2000
The pinout for the 25-pin System connector is provided later in this chapter. The
pinouts for the individual channels are located in the chapter for that channel.
The panel cutout size conforms to the 3/8 DIN standard. Panel-Mounting Jacks
(order code AA928) are available that slide into two slots at the sides of the instru-
ment. Use the following procedure to mount an SC1000 or SC2000 into a panel.
SC Series Instruction Manual
page 27