Honda CRF450R 2009 Service Manual page 308

CLUTCH/KICKSTARTERlGEARSHIFT LINKAGE
11·20
CLUTCH OUTER INSTALLATION
Apply molybdenum oil solution to the clutch outer guide
sliding surface, and install it to the mainshaf\.
Apply engine oil to the needle bearing , and install it to
the clutch outer guide.
Apply engine oil to the clutch outer sliding area.
Install the clutch outer and thrust washer.
Install the following:
- Clutch center, clutch discs, clutch plates (page 11-
14)
- Righi crankcase cover (page 11-8)
LIFTER LEVER REMOVAL
Remove the clutch lifter rod (page 11-10).
Disconnect the clutch cable and remove the clutch lifter
lever from the left crankcase.
Remove the oil seal.
LIFTER LEVER INSPECTIONI
INSTALLATION
Check the clutch lifter lever for bends or damage.
Check the needle bearings for wear or damage , replace
them if necessary (page 11-21).
Apply grease to a new oil seal lips and install it to the
left crankcase.
LIFTER LEVER