Honda CRF450R 2009 Service Manual page 174

FUEL SYSTEM (PGM-FI)
6-42
FUEL INJECTOR SIDE
1. Relieve the fuel pressure (page 6-40).
Check the fuel Quick connect fitting for dirt, and
clean if necessary.
Remove the bolt, clamp and setting rubber.
2. Release the Joint rubber from the retainer.
3. Place a shop towel over the quick connect fitting.
4. Hold the connector with one hand and squeeze the
retainer tabs with the other hand to release Ihem
from the locking pawls.
Pull the connector off, then remove the retainer from
the fuel in;ector joint.
NOTE :
Absorb the remaining fuel in the fuel feed hose with
a shop toweL
Be careful not to damage the hose or other parts.
Do not use tools.
If the connector does nol move, keep the retainer
tabs pressed down , and alternately pull and push
the connector unit it comes off easily.
JOINT RUBBER
QUICK CONNECT FiniNG
RETAINER TABS
LOCKING PAWLS