Honda CRF450R 2009 Service Manual page 239

Install the cylinder head hanger plates and bolts.
Loosely install the cylinder head hanger bolts.
After installing all mounting fasteners, tighten the
fasteners to the specified torque.
TORQUE :
Swlngarm pivot nut:
88 N'm (9.0 kgf'm, 65 IbHt)
Front engine hanger nut:
54 N'm (5.5 kgf'm, 40 IbHt)
Lower engine hanger nut:
54 N 'm (5.5 kgf'm, 40 IbHt)
Cylinder head hanger bolt:
54
N 'm (5.5 kgf'm, 40 IbHt)
Cylinder head hanger plate bolt :
'09· ' 12: 33 N' m (3.4 kgf' m, 241bHt)
After '12: 32 N'm (3.3 kgf' m, 24Ibf·ft)
Front engine hanger plate nut:
26 N'm (2.7 kgf·m, 19Ibf·ft)
'09 . '12'
Connect the lower radia tor hose to the wa ter pump
cover.
Connectlhe upper radiator hose to the cylinder head .
Tighten the hose band screws securely (page 7-13).
'09,
'14: Connect the clutch cable to the clutch lifter lever.
Install the clutch cable stay and bolts
Tighten the bolts securely.
ENGINE REMOVAUINSTALLATION
8-11