Honda CRF450R 2009 Service Manual page 241

'09· '12: Install the wire band.
'09
Connect the allemalor/CKP sensor 6P (Natural) and
gear position switch 2P (Green) connectors.
Install the wire band.
Install the following:
- Drive chain (page 4-21)
'09 - "4 : IgnitIOn coil (page 17-16)
Brake pedal pivot boll (page 16-30)
Gearshift pedal (page 11 -28)
Kickslarter pedal (page 11-9)
Throttle body (page 6--67)
Exhaust pipe (page 3-16)
Fuel tank (page 6-59)
Engine guard (page 3-6)
Condenser (page 17-22)
After
'12: - Regulator/rectifier (page 17.14)
- '13· '14: Righi side radiator (page 7.11)
- After ' 14: Right and left radiators (page 7.11)
Fill the radiator With the recommended coolant mixture
to the filler neck and bleed the air (page 7-9),
Fill the engine with the recommended oil (page 4-16),
Fill the transmission with the recommended oil
(page 4-20),
After installing the engine, perform the following
Inspections and adjustments:
- Throttle grip freeplay (page 4-8)
- Drive chain slack (page 4-23)
- Clutch lever free play (page 4-30)
Check the exhaust system and cooling system for
leaks.
ENGINE REMOVAUINSTALLATION
'09 shown:
WIRE BAND
8-13