Honda CRF450R 2009 Service Manual page 177

3. Unlock the slide retainer of the quick connect fitting
by completely pulling it up.
4. Release the quick connect fitting from the fuel jOint
while holding the connector housing.
Prevent the remaining fuel in the fuel hose from
flowing oul, using a shop towel.
Be careful not to damage the slide retainer and
hose.
Do not use tools.
5. To prevent damage and keep foreign matter out.
cover the disconnected connector and pipe end with
plastic bags.
QUICK CONNECT FITTING
INSTALLATION ('09 - '14)
Always replace the retainer of the quick connect
fitting and JOint rubber when the fuel hose is
disconnected.
If the rubber cover and fitling cover are damaged or
cut, replace them with a new one.
Do not bend or twist the fuel hose.
If
any
relainer needs replacing, use the same
manufacturer's retainer as the ones being removed
(The various manufactures feature different retainer
specification ).
FUEL PUMP SIDE
1. Insert a new retainer by aligning its locking pawls
wIth the connector grooves.
FUEL SYSTEM (PGM-FI)
RETAINER
JOINT
I \
QUICK CONNECT FiniNG
CONNECTOR
I
PIPEE_ N O ~
______________________
~
)-,>-------/
CONNECTOR
Align
~ RETAINER
I
....
6-45