Honda CRF450R 2009 Service Manual page 299

CLUTCH/KICKSTARTERIGEARSHIFT LINKAGE
After '12
Remove the following:
- Clutch lifter assembly
- Clutch lifter rod
'09, '10:
Remove the eight clutch discs and seven clutch plates.
After '10:
Remove the following:
- Seven clu tch disc B
- Seven clu tch plates
- Clutch disc A
- Judder spring
- Spring seal
Bend the tab of the lock washer away from the lock nut.
Remove the clutch center lock nut while holding the
clutch center using the Special tool.
TOOL:
Clutch center holder
07724'()050002
or
equivalent
commercially
available in U.S.A.
Remove the lock washer and thrust washer.
Remove the special tool and clutch center.
11-11