Xerox WorkCentre 5022 Service Manual page 693

9.1.10 Tray Lock Kit
Product Code
•
Installation Procedures
1. Check the bundled items. (Figure 1)
Table 1
No Name
1 Lock Tray Support
2 Tray Lock
3 Screw
Figure 1 j0mg91026
2. Turn OFF the power switch and make sure that the screen display turns OFF.
When turning OFF the power switch, check that the "Data" lamp is OFF and that there is
no Job in progress.
3. Unplug the power plug.
When maintaining the machine, turn OFF the power switch and unplug the power
plug.
4. Remove the Right Cover. (Figure 2)
a. Remove the screw (x4).
b. Remove the Right Cover.
Version 1.0
WC 5022/5024
Qty
1
1
1
CAUTION
WARNING
5. Remove the Blind Cover at the Right Cover. (Figure 3)
a. Remove the Blind Cover.
6. Install the Lock Tray Support. (Figure 4)
a. Install the Lock Tray Support.
b. Secure it by using the screw.
06/2014
9-25
Figure 2 j0mg91027
Figure 3 j0mg91028
Installation/Removal
9.1.10 Tray Lock Kit