Xerox WorkCentre 5022 Service Manual page 163

116-317 Configuration NG
BSD-ON:
The device was started up with a run prohibited Controller Firmware.
Cause/Action
Upgrade the Controller software or contact the Support Department.
Version 1.0
WC 5022/5024
116-321 Controller Logic Fail
BSD-ON:-
• A software defect that cannot be ignored was found in the Controller software.
• The CPU has rebooted due to the occurrence of an exception.
Cause/Action
1. Turn the power OFF and ON.
2. Install a Controller Firmware with the correct version.
06/2014
2-141
Status Indicator RAPs
116-317 Configuration NG