Xerox WorkCentre 5022 Service Manual page 467

6.3.6.2 NVM IIT
Chain-Link NVM Name
710-501 Fax Document Size Detection
710-551 JAM Bypass
710-600 Size Mismatch Set
710-601 Alternate Size Set 1
710-602 Alternate Size Set 2
710-603 Alternate Size Set 3
710-604 Alternate Size Set 4
710-605 Alternate Size Set 5
710-606 Alternate Size Set 6
710-607 Alternate Size Set 7
Version 1.0
WC 5022/5024
Table 1 NVM IIT
Setting Setting
Range Range
(Minimum (Maximum Default
Value) Value) Value Read/Write Description
0 1 0 O
0 1 0 O
1 3 3 O
1 2 1 O
1 2 1 O
0 2 0 O
0 2 0 O
0 2 0 O
0 3 0 O
0 3 0 O
06/2014
6-39
Indicates the switching of detection method when Fax Document Size Detection
is specified in DADF mode.
0: A/B series, 1: Inch series
0: Do not bypass, 1: Bypass
Applies to CVT mode.
1: When Size Mismatch is detected, notify a Jam.
2: Size Mismatch Detection OFF.
3: When Size Mismatch is detected, notify an operation fail and purge the docu-
ment. Reduced range for non-standard in the No Mixed Size Detection Table.
Switches between 8.5x13 SEF and 8.46x12.4 SEF.
0: Default
1: 8.5x13 SEF
2: 8.46x12.4 SEF
Switches between 8.5x14 SEF and 8.46x12.4 SEF.
0: Default
1: 8.5x14 SEF
2: 8.46x12.4 SEF
Switches between 11x15 SEF and 11x17 SEF.
0: Default
1: 11x17 SEF
2: 11x15 SEF
Switches between 8.5x13 SEF and 8.5x14 SEF.
0: Default
1: 8.5x13 SEF
2: 8.5x14 SEF or 8.5x13.4 SEF
B5 SEF
0: Default
1: B5 SEF
Switches among 8x10 SEF, 8x10.5 SEF, and 8.5x11 SEF.
0: Default
1: 8.5x11 SEF
2: 8x10 SEF
3: 8x10.5 SEF
Switches among 8x10 LEF, 8x10.5 LEF, and 8.5x11 LEF.
0: Default
1: 8.5x11 LEF
2: 8x10 LEF
3: 8x10.5 LEF
General
6.3.6.2 NVM IIT