Xerox WorkCentre 5022 Service Manual page 468

Chain-Link NVM Name
710-608 Alternate Size Set 8
710-609 Alternate Size Set 9
710-610 Alternate Size Set 10
710-611 Alternate Size Set 11
710-612 Size-Mix Mode Assumed Size
710-613 Fixed Size Selection
710-620 DADF Dpm Specification
715-010 Energy Saver Disable
715-017 IIT Fail Bypass
General
6.3.6.2 NVM IIT
Table 1 NVM IIT
Setting Setting
Range Range
(Minimum (Maximum Default
Value) Value) Value Read/Write Description
0 4 0 O
0 2 0 O
0 3 0 O
0 3 0 O
0 1 1 O
0 1 0 O
0 65535 0 O
0 1 0 O
0 1 0 O
06/2014
6-40
Switches among B4 SEF and 11x17 SEF.
0: Default
1: B4 SEF
2:11x17 SEF
Switches between 8x10 SEF and 8x10.5 SEF.
0: Default
1: 8x10 SEF
2: 8x10.5 SEF
Switches between B5 LEF and 8.5x11 LEF.
0: Default
1: B5 LEF
2: 8.5x11 LEF
Switches between B5 SEF and 8.5x11 SEF.
0: Default
1: B5 SEF
2: 8.5x11 SEF
Switches between LEF and SEF
0: LEF
1: SEF
During Fax Mixed Size Mode, switches the size (Standard/Non-standard) noti-
fied to IISS from the DADF.
0: Non-standard mode
1: Standard mode
Specifies the DPM for DADF.
0: Operates at the maximum performance DPM of DADF
1~65535: Operates at the specified DPM (in increments of 1 DPM)
When Setting Value: 0,
At Power OFF: Move the CRG to the W-Ref board position. *Note
At Power ON: Initialize the CRG.
Returning from Energy Saver: Do not initialize the CRG.
When Setting Value: 1,
At Power OFF: Do not move the CRG.
At Power ON: Initialize the CRG.
Returning from Energy Saver: Initialize the CRG.
*Depending on the setting value of 719-999, there might be no movement
instead.
For more details, refer to the Meaning column of 719-999.
0: Fail Bypass OFF
1: Fail Bypass ON
Version 1.0
WC 5022/5024