Xerox WorkCentre 5022 Service Manual page 274

Figure 6 j0lj41310
8. Move the housing to the tip of the shaft. (Figure 7)
a. Remove the Bearing.
b. Remove the KL-Clip.
c. Move the housing in the direction of the arrow until it is at the tip of the shaft.
Figure 7 j0lj41311
9. Remove the MSI Feed Roll. (Figure 8)
a. Remove the gear.
b. Remove the MSI Feed Roll.
Repairs and Asdjustments
Replacement
1. To install, carry out the removal steps in reverse order.
2. When installing the MSI Feed Clutch, align the Cutout of the MSI Feed Clutch to the Tab.
(Figure 9)
3. When installing the MSI Top Cover, store the Link of the Paper Stopper Lock underneath
the Boss of the MSI Feed Roll Housing. (Figure 10)
• After installing the MSI Top Cover, check from the hole of the MSI Top Cover to make
sure that the Link is underneath the Boss..
06/2014
4-50
Figure 8 j0lj41312
Figure 9 j0lj41313
Version 1.0
WC 5022/5024