Xerox WorkCentre 5022 Service Manual page 32

003-795 AMS NG Out Of Range
BSD-ON:-
When [Reduce/Enlarge] is set to [Auto], the reduce/enlarge ratio was not within the range of 50
to 200%.
Cause/Action
Press [Stop] on the UI Panel and change the settings.
NOTE: When performing the operation again, the same Fault will occur if the user had pro-
ceeded without changing the settings.
Status Indicator RAPs
003-795 AMS NG Out Of Range
003-942 Not-Supported Doc Size
BSD-ON:-
During DADF Scan of a Copy, Scan and Fax sending Job, an unsupported document size was
detected.
Cause/Action
1. Press [Stop] on the UI Panel.
2. Check the setting of the document size group.
3. Check whether the document size is a supported size.
4. If the document size is a supported size, the DADF might have malfunctioned. Refer to
following FIP to check the DADF.
• 005-196 (Size Mismatch Jam on No Mix-size)
• 005-948 (SS-Size Mismatch Jam on No Mix-size)
06/2014
2-10
Version 1.0
WC 5022/5024