Xerox WorkCentre 5022 Service Manual page 129

062-396 CCD Cable Connection Fail
BSD-ON: CH3.1
A CCD Flat Cable connection error was detected.
Cause/Action
1. Turn the power OFF and ON.
2. Turn OFF the power and check the Flat Cable between the CCD PWB J700 and the
ESS/MCU PWB J420 for open circuits, short circuits, and poor contacts (especially,
check whether the Flat Cable was inserted in a skewed manner).
3. If no problem is found, replace the following parts in sequence:
• CCD Flexible Flat Cable (PL 1.9)
• ESS/MCU PWB (PL 18.3)
Version 1.0
WC 5022/5024
06/2014
2-107
Status Indicator RAPs
062-396 CCD Cable Connection Fail