Xerox WorkCentre 5022 Service Manual page 58

016-749/799 HBPL or XPJL Syntax Error/ Print Instruction
Fail
BSD-ON:-
[HBPL or XPJL Syntax Error]
When the Print Job data interpretation is in progress, an illegal command that cannot be
ignored was received from the Client driver.
[Print Instruction Fail]
During the Print Job, the Job cannot be executed with the specified combination of print param-
eters (Stored File Size, Paper Size, Paper Tray, Duplex Settings, Output Tray, and etc.).
NOTE: During Continuous Print, this error will not occur until the paper that immediately pre-
cedes the paper where the applicable image is supposed to be printed on has been output suc-
cessfully.
Cause/Action
1. Press [Stop] on the UI Panel.
2. Check whether the Printer Driver that is being used is the correct one.
3. Check whether the specified print parameters are correct.
Status Indicator RAPs
016-749/799 HBPL or XPJL Syntax Error/ Print In-
016-759 Copy Counter Full
BSD-ON:-
During Multi Account Mode, any of the following has occurred:
• The general user that is logged in has reached the allotted maximum print count.
• A general user that has reached the allotted maximum print count has logged in.
Cause/Action
1. Press [Stop] on the UI Panel.
2. Clear the count for the user.
06/2014
2-36
Version 1.0
WC 5022/5024