Xerox WorkCentre 5022 Service Manual page 506

Chain-Link NVM Name
770-104 PFRID_IPV6_STACK_CONFIG
770-126 PFRID_IPV6_PROT_MANUAL_MANUALA
DDRCONF
770-130 PFRID_SYS_IF_LIST_NM_ENABLE
770-140 PFRID_SYS_IF_LIST_EWS_ENABLE
770-151 PFRID_IPV6_CONFIG_INET6ACCESSCO
NTROLMODE
770-165 PFRID_EWS_MODE_PORT_NUM
770-222 PFRID_SYS_IF_LIST_P9100_ENABLE
771-075 PFRID_EWS_FEATURE__PFRSC_EWS_F
EATURE_INDEX_TITLE_TAG
830-083 PFRID_SYS_IF_LIST_MAILSEND_ENABLE 0
General
6.3.16 NVM NET
Table 1 NVM NET
Setting Setting
Range Range
(Minimum (Maximum Default Infrequent
Value) Value) Value Range
- - 4 4, 6, 10
0 1 0 -
0 1 1 -
0 1 1 -
0 1 0 -
1 65535 80 -
0 1 1 -
0 1 0 -
1 1 -
06/2014
6-78
Write Default
Allowed/ Value
Protected Yes/No Description
O O 4: Start IPv4 protocol only
6: Start IPv6 protocol only
10: Start both IPv4 and IPv6 protocols
O X 0: IPv6 Protocol related manual settings function dis-
abled
1: IPv6 Protocol related manual settings function
enabled
O O 0: Function Disabled
1: Function Enabled
O O 0: Function Disabled
1: Function Enabled
O O 0: Do not perform IPv6 Access Control
1: Perform IPv6 Access Control
O O The CWIS connection port number
O O 0: Function Disabled
1: Function Enabled
O O 0: The value of PFRID_EWS_TITLE_TAG_STR (fixed
value on ROM) is displayed in the title of CWIS.
1: [Product name - IP address] is displayed in the title
of CWIS.
O O 0: Function Disabled
1: Function Enabled
Version 1.0
WC 5022/5024