6.5.1.1 UI CE Diag Mode Structure
The UI displays the CE Diag Mode as a [4-Line LCD] screen.
UI Screen
The structure of the CE Diag Mode is as follows.
Enter the CE Diag Mode and sort through the diagnostic functions by inputting the Chain-Links
on the [Diagnostics Mode Base] screen.
1.
Shutdown History
•
Initialize Fault History
2.
NVM Read / Write
3.
Analog Monitor
4.
NVM Initialize
5.
Component Check
6.
Maintenance Report
7.
HFSI Counter Clear/Initialize
8.
DATA All Delete
•
DATA All Delete (Controller NVM)
•
DATA All Delete (Fax NVM)
9.
Test Pattern Print
10. ATC Check
11. Tone Up / Down
•
Tone Up
•
Tone Down
12. Read Temperature
13. IIT Calibration
•
Auto Shading (Platen)
•
Auto Shading (DADF BW)
•
Auto Shading (DADF CL)
•
LED Calibration
Version 1.0
WC 5022/5024
14. IIT Breakdown Diagnosis
15. DADF Size Detect Auto Adjust
16. Self Test Settings (Fax)
•
Market Info Initialize
•
Factory Settings
17. Self Test Request (Fax)
•
Tonal Signal Test
•
Dial Pulse Test
•
DTMF Dial Pulse Test
•
DTMF Signal Test
•
Modem Signal Test
•
Parameter Check
•
RAM Check
•
RTC Check
•
NCU Relay On/Off Test
18. Billing Counter Check and Repair (621-400)
06/2014
6-103
6.5.1.1 UI CE Diag Mode Structure
General