3-34 Compaq ProLiant ML370 Maintenance and Service Guide
6700-6799, SCSI Tape Drive Test Error Codes
The 6700 series of diagnostic error codes identifies failures with tape cartridges, tape drives,
media changers, tape drive cabling, adapter boards, or the system board assembly.
Error Code
6700-xx
6706-xx
6708-xx
6709-xx
6728-xx
7079
8600-8699, Pointing Device Interface Test Error Codes
The 8600 diagnostic error codes identifies failures with the pointing device (mouse, trackball,
and so on) or the system board assembly.
Error Code
8601-xx
SCSI Tape Drive Test Error Codes
Description
SCSI tape ID drive types test failed.
SCSI disk SA/media test failed.
SCSI controller test
SCSI disk erase tape test failed.
Media load/unload test failed.
Battery test
Pointing Device Interface Test Error Codes
Description
Pointing Device Interface test failed.
Table 3-14
Recommended Action
1.
Run the System Configuration Utility and
verify the drive type.
2.
Replace the SCSI tape drive signal and
power cables and retest.
3.
Replace the SCSI controller and retest.
4.
Replace the SCSI tape drive and retest.
5.
Replace the system board and retest.
Table 3-15
Recommended Action
1.
Replace with a working pointing device and
retest.
2.
Replace the system board and retest.