Standby Recovery Server Option; Server Port - Compaq PROLIANT ML370 Maintenance And Service Manual

You can configure the server to start Compaq Utilities in four different ways:
I
Without remote console support; for example, to run Compaq Utilities from the server
console only
I
With remote console support using modems for dial-in access
I
With remote console support using a modem to dial a predetermined telephone number
I
With remote console support through a network connection (IP or IPX)
Features
Software error recovery
Software error recovery timeout

Standby recovery server option

Standby recovery server port
Standby recovery timeout
Software error recovery boot option
Thermal shutdown
UPS shutdown
UPS shutdown threshold
Table 3-18
ASR-2 Features
Definition
If enabled, ASR-2 is activated if the OS hangs or has a crash that
results in a lockup.
Determines how long the server waits to enable ASR-2 after an OS
lockup
If enabled, ASR-2 activation initiates a switch to a standby recovery
server.
Port used to communicate with the recovery server.
Determines how long the server waits to initiate switch after ASR-2
activation
Allows the server to restart either into the OS or into Compaq
Utilities
If enabled, shuts down the server if a critical thermal error occurs
If enabled, allows the server to perform a shutdown if a UPS is
activated
Determines how long the server waits to shut down after the UPS
is activated. If desired, this number should provide enough time for
an administrator to perform any necessary operations or to
gracefully shut down the server.
Diagnostics and Troubleshooting 3-53