Zte H3140 Maintenance Management Manual page 61

Figure 5-16 RA Service Page
14. Configure the
Table 5-13 Parameter Descriptions for the RA Service
Parameter
RA Service
Specify MTU
MTU
Preference
Min Retry Interval
Max Retry Interval
M
O
Prefix Delegate Type
15. Click Apply button to apply the changes.
SJ-20210621164956-009 | 2021-12-07(R1.0)
RA service parameters.Table 5-13
Description
Enable or disable the RA service function.
If On button is selected, enter the MTU value.
Define the maximum transfer unit.
By default, the preference is Middle.
The minimum time allowed between sending unsolicited multi-
cast Router Advertisements from the interface. (The value must
not be greater than 0.75 × (Maximum Retry Interval )).
maximum time allowed between sending unsolicited multicast
Router Advertisements from the interface.
Managed flag.
Select this check box to enable the connected devices to obtain
the IPv6 address through DHCP IPv6.
Other configure flag.
Select this check box to enable the connected devices to obtain
DNS address through DHCP IPv6.
AutoSense: All the available prefixes will be delegated.

Manual: One or more prefixes selected manually from all the

static prefixes configured before will be delegated.
5 Configure the Local Network
lists the RA service parameters.
55